dmesg - AMD FX-8370 Eight-Core - Sapphire AMD Radeon R9 200
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
Command line: BOOT_IMAGE=/vmlinuz-4.4.0-59-generic.efi.signed root=/dev/mapper/ubuntu--gnome--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00bd800000
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000ba0b9fff] usable
BIOS-e820: [mem 0x00000000ba0ba000-0x00000000ba925fff] reserved
BIOS-e820: [mem 0x00000000ba926000-0x00000000ba935fff] ACPI data
BIOS-e820: [mem 0x00000000ba936000-0x00000000bb739fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb73a000-0x00000000bc9d7fff] reserved
BIOS-e820: [mem 0x00000000bc9d8000-0x00000000bca33fff] type 20
BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd082fff] usable
BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.10 by American Megatrends
efi: ACPI=0xba92e000 ACPI 2.0=0xba92e000 SMBIOS=0xf04c0
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R3.0, BIOS 0212 07/18/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BD800000 mask FFFFFF800000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000440000000 aka 17408M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 3032M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
BRK [0x02210000, 0x02210fff] PGTABLE
RAMDISK: [mem 0x32cf8000-0x35673fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BA92E000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BA92E078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BA9350E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x00000000BA92E170 006F74 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BB734F80 000040
ACPI: APIC 0x00000000BA9351F8 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BA935298 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BA9352E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BA935320 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x00000000BA9356F0 0000E8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: BGRT 0x00000000BA9353B0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BA9353E8 000304 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
NODE_DATA(0) allocated [mem 0x43fff6000-0x43fffafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000ba0b9fff]
node 0: [mem 0x00000000bca34000-0x00000000bca34fff]
node 0: [mem 0x00000000bcc3b000-0x00000000bd082fff]
node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
node 0: [mem 0x0000000100001000-0x000000043fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
On node 0 totalpages: 4170925
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 11861 pages used for memmap
DMA32 zone: 759055 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407871 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xba0ba000-0xba925fff]
PM: Registered nosave memory: [mem 0xba926000-0xba935fff]
PM: Registered nosave memory: [mem 0xba936000-0xbb739fff]
PM: Registered nosave memory: [mem 0xbb73a000-0xbc9d7fff]
PM: Registered nosave memory: [mem 0xbc9d8000-0xbca33fff]
PM: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88043fc00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4105726
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-59-generic.efi.signed root=/dev/mapper/ubuntu--gnome--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
Memory: 16075752K/16683700K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 607948K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:1032 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4715.982 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 9431.96 BogoMIPS (lpj=18863928)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32064 entries in 126 pages
smpboot: APIC(10) Converting physical 1 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (75455.71 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xba936000-0xbb739fff] (14696448 bytes)
PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:36:27, date: 01/19/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:67b1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:02:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1102:0012] type 00 class 0x040300
pci 0000:04:00.0: reg 0x10: [mem 0xfe704000-0xfe707fff 64bit]
pci 0000:04:00.0: reg 0x18: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:04:00.0: supports D2
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0d.0: PCI bridge to [bus 07]
pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:09:00.0: [1b21:1343] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 09]
pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:0a:00.0: [8086:1539] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [mem 0xfe500000-0xfe51ffff]
pci 0000:0a:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:0a:00.0: reg 0x1c: [mem 0xfe520000-0xfe523fff]
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 0a]
pci 0000:00:15.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.1: bridge window [mem 0xfe500000-0xfe5fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xba0ba000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0d.0: PCI bridge to [bus 07]
pci 0000:00:14.4: PCI bridge to [bus 08]
pci 0000:00:15.0: PCI bridge to [bus 09]
pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:15.1: PCI bridge to [bus 0a]
pci 0000:00:15.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.1: bridge window [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:09: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:0a: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xfe500000-0xfe5fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42480K (ffff880032cf8000 - ffff880035674000)
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:04.0 to group 2
iommu: Adding device 0000:00:06.0 to group 3
iommu: Adding device 0000:00:09.0 to group 4
iommu: Adding device 0000:00:0a.0 to group 5
iommu: Adding device 0000:00:0b.0 to group 6
iommu: Adding device 0000:00:0d.0 to group 7
iommu: Adding device 0000:00:11.0 to group 8
iommu: Adding device 0000:00:12.0 to group 9
iommu: Adding device 0000:00:12.2 to group 9
iommu: Adding device 0000:00:13.0 to group 10
iommu: Adding device 0000:00:13.2 to group 10
iommu: Adding device 0000:00:14.0 to group 11
iommu: Adding device 0000:00:14.2 to group 12
iommu: Adding device 0000:00:14.3 to group 13
iommu: Adding device 0000:00:14.4 to group 14
iommu: Adding device 0000:00:14.5 to group 15
iommu: Adding device 0000:00:15.0 to group 16
iommu: Adding device 0000:00:15.1 to group 16
iommu: Adding device 0000:00:16.0 to group 17
iommu: Adding device 0000:00:16.2 to group 17
iommu: Adding device 0000:01:00.0 to group 18
iommu: Adding device 0000:01:00.1 to group 18
iommu: Adding device 0000:02:00.0 to group 19
iommu: Adding device 0000:03:00.0 to group 20
iommu: Adding device 0000:04:00.0 to group 21
iommu: Adding device 0000:09:00.0 to group 16
iommu: Adding device 0000:0a:00.0 to group 16
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1484847387.012:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-59-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-59-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-59-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0-59-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb10: SerialNumber: 0000:03:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb11: SerialNumber: 0000:03:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 12
xhci_hcd 0000:09:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb12: New USB device found, idVendor=1d6b, idProduct=0002
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: xHCI Host Controller
usb usb12: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb12: SerialNumber: 0000:09:00.0
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 13
usb usb13: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb13: New USB device found, idVendor=1d6b, idProduct=0003
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: xHCI Host Controller
usb usb13: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb13: SerialNumber: 0000:09:00.0
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 1:780:643
rtc_cmos 00:03: setting system clock to 2017-01-19 17:36:28 UTC (1484847388)
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[drm] Initialized drm 1.1.0 20060810
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
amdgpu: module verification failed: signature and/or required key missing - tainting kernel
Could not create tracefs 'fence_wait_end' directory
Could not create tracefs 'fence_wait_start' directory
Could not create tracefs 'fence_signaled' directory
Could not create tracefs 'fence_enable_signal' directory
Could not create tracefs 'fence_destroy' directory
Could not create tracefs 'fence_init' directory
Could not create tracefs 'fence_emit' directory
Could not create tracefs 'fence_annotate_wait_on' directory
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pps pps0: new PPS source ptp0
igb 0000:0a:00.0: added PHC on eth0
igb 0000:0a:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:0a:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:8b:cd:56:45:52
igb 0000:0a:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:0a:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:0a:00.0 enp10s0: renamed from eth0
usb 4-2: new full-speed USB device number 2 using ohci-pci
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x174B:0xE285 0x00).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
[drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[drm] probing mlw for device 1002:5a16 = 33ed02
amdgpu 0000:01:00.0: Invalid ROM contents
ATOM BIOS: C67111
[drm] GPU post is not needed
amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits GDDR5
[TTM] Zone kernel: Available graphics memory: 8202478 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
usb 7-1: new full-speed USB device number 2 using ohci-pci
usb 4-2: New USB device found, idVendor=046d, idProduct=c07d
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: Gaming Mouse G502
usb 4-2: Manufacturer: Logitech
usb 4-2: SerialNumber: 0A7633583835
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] Internal thermal controller with fan control
[drm] Invalid PCC GPIO: 13!
[drm] amdgpu: dpm initialized
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000010, cpu addr 0xffff8804251af010
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000020, cpu addr 0xffff8804251af020
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000030, cpu addr 0xffff8804251af030
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000040, cpu addr 0xffff8804251af040
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000050, cpu addr 0xffff8804251af050
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000100000060, cpu addr 0xffff8804251af060
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000070, cpu addr 0xffff8804251af070
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000080, cpu addr 0xffff8804251af080
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000100000090, cpu addr 0xffff8804251af090
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000001000000a0, cpu addr 0xffff8804251af0a0
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000b0, cpu addr 0xffff8804251af0b0
[drm] Found UVD firmware Version: 1.64 Family ID: 9
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000088bd30, cpu addr 0xffffc90002238d30
[drm] Found VCE firmware Version: 50.10 Binary ID: 2
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000001000000d0, cpu addr 0xffff8804251af0d0
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000001000000e0, cpu addr 0xffff8804251af0e0
[drm] PCIE gen 2 link speeds already enabled
[drm] DAL is enabled
[drm] [FeatureOverride_overriden feature] Overridden FEATURE_ENABLE_GPU_SCALING is enabled now
[drm] [Backlight_Caps] This method is not supported
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] [HwTrace_Hotplug] Connector[0] description:signal 32
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC1 [1]
[drm] [HwTrace_Hotplug] Connector[1] description:signal 4
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC3 [3]
[drm] [HwTrace_Hotplug] Connector[2] description:signal 2
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC4 [4]
[drm] [HwTrace_Hotplug] Connector[3] description:signal 2
[drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC6 [6]
usb 12-1: new high-speed USB device number 2 using xhci_hcd
[drm] [IfTrace_DC] Display Core initialized
[drm] amdgpu: freesync_module init done ffff8800b824a700.
[drm] [HwTrace_Hotplug] link=0, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=0: dc_sink didn't change.
usb 7-1: New USB device found, idVendor=1b1c, idProduct=0c0a
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: H115i
usb 7-1: Manufacturer: Corsair Components, Inc.
usb 7-1: SerialNumber: 7289_2.0
[drm] [Conn_Detect] [HDMI-A-1] SMBX2431: [Block 0] 00 FF FF FF FF FF FF 00 4C 2D 71 07 47 43 32 42 08 15 01 03 80 35 1E 78 2A 60 41 A6 56 4A 9C 25 12 50 54 BF EF 80 71 4F 81 00 81 40 81 80 95 00 95 0F A9 40 B3 00 02 3A 80 18 71 38 2D 40 58 2C 45 00 13 2B 21 00 00 1E 01 1D 00 72 51 D0 1E 20 6E 28 55 00 13 2B 21 00 00 1E 00 00 00 FD 00 38 4B 1E 51 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 53 4D 42 58 32 34 33 31 0A 20 20 20 20 01 41 ^
[drm] [Conn_Detect] [HDMI-A-1] SMBX2431: [Block 1] 02 03 1C F1 48 90 04 1F 05 14 13 12 03 23 09 07 07 83 01 00 00 66 03 0C 00 20 00 80 01 1D 80 D0 72 1C 16 20 10 2C 25 80 13 2B 21 00 00 9E 01 1D 80 18 71 1C 16 20 58 2C 25 00 13 2B 21 00 00 9E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 13 2B 21 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 13 2B 21 00 00 18 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 13 2B 21 00 00 18 00 00 00 00 00 00 00 00 00 3D ^
[drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = 2D4C, product_id = 771, serial_number = 42324347, manufacture_week = 8, manufacture_year = 21, display_name = SMBX2431, speaker_flag = 1, audio_mode_count = 1
[drm] [Detection_EDID Parser] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] [HwTrace_Hotplug] link=1, dc_sink_in=ffff880425483400 is now Connected
[drm] DCHPD: connector_id=1: Old sink= (null) New sink=ffff880425483400
[drm] [HwTrace_Hotplug] link=2, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=2: dc_sink didn't change.
[drm] [Conn_Detect] [DVI-D-2] SMBX2431: [Block 0] 00 FF FF FF FF FF FF 00 4C 2D 71 07 37 43 32 42 08 15 01 03 80 35 1E 78 2A 60 41 A6 56 4A 9C 25 12 50 54 BF EF 80 71 4F 81 00 81 40 81 80 95 00 95 0F A9 40 B3 00 02 3A 80 18 71 38 2D 40 58 2C 45 00 13 2B 21 00 00 1E 01 1D 00 72 51 D0 1E 20 6E 28 55 00 13 2B 21 00 00 1E 00 00 00 FD 00 38 4B 1E 51 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 53 4D 42 58 32 34 33 31 0A 20 20 20 20 01 51 ^
[drm] [Conn_Detect] [DVI-D-2] SMBX2431: [Block 1] 02 03 1C F1 48 90 04 1F 05 14 13 12 03 23 09 07 07 83 01 00 00 66 03 0C 00 10 00 80 01 1D 80 D0 72 1C 16 20 10 2C 25 80 13 2B 21 00 00 9E 01 1D 80 18 71 1C 16 20 58 2C 25 00 13 2B 21 00 00 9E 01 1D 00 BC 52 D0 1E 20 B8 28 55 40 13 2B 21 00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 13 2B 21 00 00 18 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 13 2B 21 00 00 18 00 00 00 00 00 00 00 00 00 4D ^
[drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = 2D4C, product_id = 771, serial_number = 42324337, manufacture_week = 8, manufacture_year = 21, display_name = SMBX2431, speaker_flag = 1, audio_mode_count = 1
[drm] [Detection_EDID Parser] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] [HwTrace_Hotplug] link=3, dc_sink_in=ffff880425486000 is now Connected
[drm] DCHPD: connector_id=3: Old sink= (null) New sink=ffff880425486000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] KMS initialized.
[drm] ring test on 0 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 2 usecs
[drm] UVD initialized successfully.
tsc: Refined TSC clocksource calibration: 4715.779 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x43f9a73bb3b, max_idle_ns: 440795292426 ns
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0DB6Q, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: WDC WD5001AALS-00E3A0, 05.01D05, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
usb 12-1: New USB device found, idVendor=174c, idProduct=2074
usb 12-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 12-1: Product: ASM107x
usb 12-1: Manufacturer: ASUS Tek.
hub 12-1:1.0: USB hub found
hub 12-1:1.0: 4 ports detected
ata1.00: ATA-8: Corsair Force GT, 5.05, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Corsair Force GT 5.05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD5001AALS-0 1D05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 0001 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 4-3: new full-speed USB device number 3 using ohci-pci
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
[drm] DM_NOT_IMPL: dm_bandwidth_update
usb 7-3: new full-speed USB device number 3 using ohci-pci
usb 13-1: new SuperSpeed USB device number 2 using xhci_hcd
[drm] ring test on 12 succeeded in 9 usecs
[drm] ring test on 13 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] fb mappable at 0xC0A27000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:01:00.0 on minor 0
usb 4-3: New USB device found, idVendor=046d, idProduct=c318
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: Logitech Illuminated Keyboard
usb 4-3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:046D:C07D.0001/input/input5
hid-generic 0003:046D:C07D.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.0-2/input0
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:046D:C07D.0002/input/input6
usb 13-1: New USB device found, idVendor=174c, idProduct=3074
usb 13-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 13-1: Product: ASM107x
usb 13-1: Manufacturer: ASUS Tek.
usb 7-3: New USB device found, idVendor=1b1c, idProduct=1c00
usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-3: Product: Corsair Link TM USB Dongle
usb 7-3: Manufacturer: Silicon Labs
usb 7-3: SerialNumber: R65P1540
hub 13-1:1.0: USB hub found
hub 13-1:1.0: 4 ports detected
hid-generic 0003:046D:C07D.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.0-2/input1
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:046D:C318.0003/input/input7
hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:12.0-3/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:046D:C318.0004/input/input8
usb 12-2: new high-speed USB device number 3 using xhci_hcd
hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:12.0-3/input1
usb 12-2: New USB device found, idVendor=174c, idProduct=2074
usb 12-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 12-2: Product: ASM107x
usb 12-2: Manufacturer: ASUS Tek.
hub 12-2:1.0: USB hub found
hub 12-2:1.0: 4 ports detected
microcode: CPU0: new patch_level=0x0600084f
microcode: CPU2: new patch_level=0x0600084f
microcode: CPU4: new patch_level=0x0600084f
microcode: CPU6: new patch_level=0x0600084f
[drm] Atomic commit: SET crtc id 0: [ffff880425b63000]
[drm] [IfTrace_DC] dc_commit_targets: 1 targets
[drm] [IfTrace_DC] core_target 0x29d11b80: stream_count=1
[drm] [IfTrace_DC] core_stream 0x254d3800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] [IfTrace_DC] link: 1
[drm] [Conn_Mode] [HDMI-A-1] {1920x1080, 2200x1125@148500Khz}^
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11b80
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] Atomic commit: SET crtc id 1: [ffff880425b64000]
[drm] [IfTrace_DC] dc_commit_targets: 2 targets
[drm] [IfTrace_DC] core_target 0x29d11b80: stream_count=1
[drm] [IfTrace_DC] core_stream 0x254d3800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] [IfTrace_DC] link: 1
[drm] [IfTrace_DC] core_target 0x29d11dc0: stream_count=1
[drm] [IfTrace_DC] core_stream 0x254d3c00: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] [IfTrace_DC] link: 3
[drm] [Sync_Timing] GSL: Setting-up...
[drm] [Sync_Timing] GSL: enabling trigger-reset
[drm] [Sync_Timing] GSL: waiting for reset to occur.
[drm] [Sync_Timing] GSL: reset occurred at wait count: 1
[drm] [Sync_Timing] GSL: disabling trigger-reset.
[drm] [Sync_Timing] GSL: Restoring register states.
[drm] [Sync_Timing] GSL: Set-up complete.
[drm] [Conn_Mode] [HDMI-A-1] {1920x1080, 2200x1125@148500Khz}^
[drm] [Conn_Mode] [DVI-D-2] {1920x1080, 2200x1125@148500Khz}^
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11dc0
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
usb 13-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 13-2: New USB device found, idVendor=174c, idProduct=3074
usb 13-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 13-2: Product: ASM107x
usb 13-2: Manufacturer: ASUS Tek.
hub 13-2:1.0: USB hub found
hub 13-2:1.0: 4 ports detected
clocksource: Switched to clocksource tsc
[drm] DM_NOT_IMPL: dm_bandwidth_update
random: nonblocking pool is initialized
NET: Registered protocol family 38
raid6: sse2x1 gen() 8153 MB/s
raid6: sse2x1 xor() 5466 MB/s
raid6: sse2x2 gen() 12213 MB/s
raid6: sse2x2 xor() 8012 MB/s
raid6: sse2x4 gen() 15093 MB/s
raid6: sse2x4 xor() 7906 MB/s
raid6: using algorithm sse2x4 gen() 15093 MB/s
raid6: .... xor() 7906 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 5279.000 MB/sec
Btrfs loaded
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Set console keymap...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Nameserver information manager.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
systemd-journald[487]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:04:00.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:04:00.0: Disabling MSI
snd_hda_intel 0000:04:00.0: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
snd_hda_codec_ca0132 hdaudioC2D1: autoconfig for CA0132: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_ca0132 hdaudioC2D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC2D1: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC2D1: mono: mono_out=0x0
snd_hda_codec_ca0132 hdaudioC2D1: dig-out=0xc/0x0
snd_hda_codec_ca0132 hdaudioC2D1: inputs:
snd_hda_codec_ca0132 hdaudioC2D1: Mic=0x12
snd_hda_codec_ca0132 hdaudioC2D1: dig-in=0xe
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input22
asus_wmi: Number of fans: 1
Adding 16687100k swap on /dev/mapper/ubuntu--gnome--vg-swap_1. Priority:-1 extents:1 across:16687100k SSFS
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
snd_hda_codec_ca0132 hdaudioC2D1: ca0132 DSP downloaded and running
audit: type=1400 audit(1484847403.865:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1287 comm="apparmor_parser"
audit: type=1400 audit(1484847403.865:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=1282 comm="apparmor_parser"
audit: type=1400 audit(1484847403.865:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1285 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1289 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1286 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1286 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1286 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1279 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1279 comm="apparmor_parser"
audit: type=1400 audit(1484847403.869:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1279 comm="apparmor_parser"
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 4715772580 Hz
vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
input: HDA Creative SPDIF as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/sound/card2/input23
input: HDA Creative Front Headphone as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/sound/card2/input24
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver cp210x
cp210x 7-3:1.0: cp210x converter detected
VBoxNetFlt: Successfully started.
usb 7-3: cp210x converter now attached to ttyUSB0
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
snd_hda_codec_ca0132 hdaudioC2D1: ca0132 DSP downloaded and running
igb 0000:0a:00.0 enp10s0: igb: enp10s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11b80
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11b80
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11dc0
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11dc0
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11b80
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11b80
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11dc0
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11dc0
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x29d11dc0
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] Atomic commit: RESET. crtc id 0:[ffff880425b63000]
[drm] Atomic commit: SET crtc id 1: [ffff880425b64000]
[drm] [IfTrace_DC] dc_commit_targets: 1 targets
[drm] [IfTrace_DC] core_target 0xb9395000: stream_count=1
[drm] [IfTrace_DC] core_stream 0x2957d400: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] [IfTrace_DC] link: 1
[drm] [Conn_Mode] [HDMI-A-1] {1920x1080, 2200x1125@148500Khz}^
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] Atomic commit: SET crtc id 0: [ffff880425b63000]
[drm] [IfTrace_DC] dc_commit_targets: 2 targets
[drm] [IfTrace_DC] core_target 0xb9395020: stream_count=1
[drm] [IfTrace_DC] core_stream 0x29579800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] [IfTrace_DC] link: 3
[drm] [IfTrace_DC] core_target 0xb9395000: stream_count=1
[drm] [IfTrace_DC] core_stream 0x2957d400: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] [IfTrace_DC] link: 1
[drm] [Sync_Timing] GSL: Setting-up...
[drm] [Sync_Timing] GSL: enabling trigger-reset
[drm] [Sync_Timing] GSL: waiting for reset to occur.
[drm] [Sync_Timing] GSL: reset occurred at wait count: 1
[drm] [Sync_Timing] GSL: disabling trigger-reset.
[drm] [Sync_Timing] GSL: Restoring register states.
[drm] [Sync_Timing] GSL: Set-up complete.
[drm] [Conn_Mode] [DVI-D-2] {1920x1080, 2200x1125@148500Khz}^
[drm] [Conn_Mode] [HDMI-A-1] {1920x1080, 2200x1125@148500Khz}^
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xb9395020
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xb9395020
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xb9395000
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xb9395020
[drm] DM_NOT_IMPL: dm_bandwidth_update
[drm] [IfTrace_DC] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0xb9395000
[drm] DM_NOT_IMPL: dm_bandwidth_update